MSR SHOCK LOGGERS FROM SWITZERLAND (SWISS MADE)

Name	Description	Category
Sew 2726 NA	FEATURES ● Microprocessor-controlled.● Built-in earth tester.● Built-in loop/psc tester. 0.03-2000Ω (software ctrl).● Built-in voltmeter.● Built-in wiring checker.● One push button smart control.● Display L-N and L-E voltages. 50 to 280Vac (sine).● Display line path impedance. 0.01-2000Ω (software ctrl).● Display earth path impedance. 0.01-2000Ω (software ctrl).● Display neutral path impedance. 0.01-2000Ω (software ctrl).● Display psc line to neutral. 6kA@230Vac> supply.● Display psc line to earth. 6kA@230Vac> supply.● Re-scroll through previous results.● Bat. ok/low battery indicator.● Auto-off function.● Color coded test leads.● Rugged Case.● Ultra low power consumption. SPECIFICATIONS Loop / Earth / Wires 0.03-2000Ω (auto-ranging) Prospective short circuit 0~6kA at 230Vac Operating voltage 50V~275Vac (50Hz) Best performance at rated voltage 230Vac ± 20V Max.10A Accuracy of voltage ±1%(210~250V) ±3% otherwise Accuracy of loops / earth ±2% (0.05~50Ω) ...	Electrical Network Analyzers
Sew 4126 NA	FEATURES ● Microprocessor-controlled.● 2 Lines × 16 Characters LCD.● Auto-ranging / Auto-off.● One Push Button Operation.● Low Consumption.● Better than 3% Accuracy(0.05-50Ω).● Wiring Integrity Check(display + LEDs).● Over temperature protection and indication.● Stores previous readings.● Measures : L-E and L-N AC voltages. L-E and L-N Loop Impedance. Prospective short circuits L-E and L-N. Earth Spike, Line and Neutral Impedances. SPECIFICATIONS Loop / Earth / Wires 0.03-2000Ω (auto-ranging) Prospective short circuit 0~6kA at 230Vac ...	Electrical Network Analyzers
Sew 165 CB	FEATURES Multi-purpose Cable Tester ● 165 CB is an ideal tool which can test the correct pin configuration for different kinds of cables.● For testing: -RJ45/RJ11 -USB -COAX -BNC cable -Multi-wire cable● Auto-scan and manual-check function● Buzzer sound warning for wire status● 2 LED module indicators on the master unit which can do both of transmitter and receiver functions for RJ45/RJ11 cable testing. Users don't need to use the receiving unit.● 165 CB provides a variety for checking cable continuity, open status, short status and miss-wired. ● Ground (shielded ) wire test.● LED indication for wire status.● Power source : 9V batteryAmplifier Probe ● The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation. ● The flashlight function for easier cable tracing in the dark.● An LED indication for the signal strength. ● Volume control for increased sensitivity and adjustable to suit work environment.● Recessed...	Cable Tester and Cable Tracer
Sew 162 CB	FEATURES Filter Probe ● Works with any Tone Generator to identify wires.● Volume control for increasing sensitivity and adjustable to suit work environment.● 2 operation modes: Filter on / Filter off.● The auto-off function (5 minutes) prevents battery consumption.● Power supply is available in any 9V battery with a life of approximately 50 hours.● A phone jack is designed for headset or handset.● Flashlight function.Tone Generator● Tone Generator is a great tool for locating and identifying cable pairs or individual conductors.● 162 CB-G doesn't only provide the function of a tone generator, but also serves as a continuity and polarity tester.● A tone selector switch located inside the unit for selection of the fast tone or the slow tone.● Two bi-colored LEDs for Line1 and Line 2 indication of the polarities of the telephone lines.● The unit has alligator type terminals, a modular cable of 4 conductors with a strong connector.● The tone and continuity functions are only...	Cable Tracers
Sew 179 CB	FEATURES Amplifier Probe ● The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation.● Works with any Tone Generator to identify wires.● Volume control for increased sensitivity and adjustable to suit work environment.● Recessed ON/OFF button prevents battery drain.● A phone jack is designed for headset or handset. Tone Generator ● Tone Generator is a great tool for locating and identifying cable pairs or individual conductors. ● 181 CB-G does not only serve as a tone generator, but also serves as a continuity and polarity tester. ● A tone selector switch located inside the unit for selection of the fast tone or the slow tone.● The continuity function is only applied to Line 1.● Two bi-colored LEDs for Line1 and Line2 indication of the polarities of the telephone lines. ● The unit has alligator type terminals, a modular...	Cable Tracers
Sew 180 CB	FEATURES Amplifier Probe ● The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation.● Works with any Tone Generator to identify wires.● Volume control for increased sensitivity and adjustable to suit work environment.● Recessed ON/OFF button prevents battery drain.● A phone jack is designed for headset or handset. Tone Generator ● Tone Generator is a great tool for locating and identifying cable pairs or individual conductors. ● 180 CB-G doesn't only provide the function of a tone generator, but also serves as a continuity and polarity tester.● Test results are displayed by a bi-colored LED. SPECIFICATIONS Amplifier Probe Frequency 1Hz~12kHz Receiver distance < 50cm Sensitivity control ˇ Probe tip Fixed Power source 9V(6F22) × 1 ...	Cable Tracers
Sew 181 CB	FEATURES Amplifier Probe ● The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation.● Works with any Tone Generator to identify wires.● Volume control for increased sensitivity and adjustable to suit work environment.● Recessed ON/OFF button prevents battery drain.● A phone jack is designed for headset or handset. Tone Generator ● Tone Generator is a great tool for locating and identifying cable pairs or individual conductors. ● 181 CB-G does not only serve as a tone generator, but also serves as a continuity and polarity tester. ● A tone selector switch located inside the unit for selection of the fast tone or the slow tone.● The continuity function is only applied to Line 1.● Two bi-colored LEDs for Line1 and Line2 indication of the polarities of the telephone lines. ● The unit has alligator type terminals, a modular...	Cable Tracers
Sew 183 CB	FEATURES Cable Tracer ● Trace wires or cables.● Volume control.● Tip & Ring identification.● 2 bi-colored LEDs ( Line 1 & Line 2).● Tone speed selection : Fast & Slow.● A phone jack is designed for headset or handset. (Amplifier probe)Phone Tester ● Continuity and resistance testing for voltage-free objects.● Check direct and alternating voltages.● Testing capacitors.● Testing diodes.● Power ON/OFF switch.● The indication of the LED lamp and the sound of the buzzer can occur at the same time.● The LED indication for Power ON status. SPECIFICATIONS Amplifier Probe Frequency 1Hz~12kHz Receiver distance < 50cm Sensitivity control ˇ Probe tip Fixed Power source 9V(6F22) × 1 Dimensions 230(L) × 56(W) × 27(D)mm Weight Approx. 125g (battery included) Tone Generator Wave form Square Wave Frequency 1kHz±15% Over voltage protection 80V DC Single tone ─ ...	Cable Tracer and Phone Tester