|
|
Kyoritsu 8124
|
|
Load current clamp sensor
Applicable model 5010/5020, 6300, 6305, 6310, 6315 |
Power Meter
|
|
|
|
|
|
|
Kyoritsu 8115
|
|
Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
•
Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
|
|
|
|
Kyoritsu 8006
|
|
AC CLAMP ADAPTOR
•
Model 8006 is designed to measure AC current up to1500A.
•
It can accommodate up to 60mm-dia conductor or 50mm by 75mm bus-bar.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
|
|
|
|
Kyoritsu 8112
|
|
AC CLAMP ADAPTOR
•
Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters. Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
|
|
|
|
Kyoritsu 8112BNC
|
|
AC CLAMP ADAPTOR Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112. |
Sensors, Multi-Trans, Clamp adaptors
|
|
|
|
|
|
|
Kyoritsu 8113
|
|
AC/DC CLAMP ADAPTOR
•
Model 8113 is a clamp-on AC/DC current/voltage converter that permits AC/DC current measurements from 1mA to 200A in conjunction with a voltmeter having 0.1mV resolution.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
|
|
|
|
Kyoritsu 8008
|
|
Multi-Trans
How to Use Clamp your instrument around the pick-up coil of the multi-tran. Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below. Multiply the reading of your clamp meter by 10 to obtain the current value measured. |
Sensors, Multi-Trans, Clamp adaptors
|
|
|
|
|
|
|
Kyoritsu Discontinued products
|
|
MODEL
Descriptions
Remark
Alternative
1007
Digital Multimeter
1009
1008
Digital Multimeter
1009
1010
Solar Pocket Tester
Solar battery
No
1015
Digital Multimeter
1018
1017
Digital Multimeter
1018
1020
Digital Multimeter
Automatic mode switchingbetween AC and DC voltage measurements.
No
1103
Analogue Multimeter
1110
1104
Analogue Multimeter
with 1000V range and10A range
1109S
1106
Analogue Multimeter
1110
1108
Analogue Multimeter
1109S
1109
Analogue Multimeter
1109S
1601
Analogue Multimeter
No
1700
Voltage Tester
KT 170
1710
Voltage Tester
KT 171
2002
Digital Clamp Meter
2002PA,2002R
2009A
AC/DC Digital Clamp Meter
2009R
2037
AC/DC Digital Clamp Meter
2046R
2103
Analogue Clamp Meter
No
2401
Analogue Leakage Clamp Meter
Equivalent battery type: P625U
No
2411
Analogue Leakage Clamp Meter
Equivalent battery type: P625U
No
2417
Leakage Clamp Meter
No
2904
Analogue Clamp... |
Discontinued products
|
|
|
|
|