|
|
Kyoritsu 6315
|
|
Simultaneous Power & Power quality measurementsPower/ Harmonics/ Waveform/ Power quality are recorded at all CHs. (Voltage: 3ch, Current 4ch)
•
Helpful support functionsQuick Start Guide, Wiring check and Sensor detection for easy and reliable measurement
•
Measurement with high accuracy
Guaranteed accuracy:
±0.3%rdg (energy),±0.2%rdg (voltage/ current)
Complies with the International Standard IEC 61000-4-30 Class Sand the European Standard EN50160
•
Remote monitoring on PC and Android deviceRemote checking of measurement in real-time is possible via Bluetooth communication.Recorded data can be saved in the supplied SD card.EN50160 report can be generated after survey by PC software.
|
Power Meter
|
|
|
|
|
|
|
Kyoritsu 6300
|
|
12 kinds of power measurements
Voltage (RMS), Current (RMS), active power, apparent power, reactive power, active energy, apparent energy, reactive energy, power factor (cos θ), frequency , demand measurement, current flowing on the neutral line(Only on 3 phase 4 wire measurement)
Regenerative electric power can be measured
Detection of consumption power and regenerative electric power Regenerative electric power: This is the electric power which is generated by private power generator, and is supplied to electric power company.
Display 3 different data simultaneously on large screen.
4 types wiring system
1 phase - 2 wire (1ch) (2ch), (3ch) 1 phase - 3 wire 3 phase - 3 wire 3 phase - 4 wire
|
Power Meter
|
|
|
|
|
|
|
Kyoritsu 6310
|
|
Can measure Flicker in accordance to IEC 61000-4-15 and EN50160 standards. Using our Flicker sensor, available as optional accessory, Pst value (short term severity in 10 minutes value) and the Plt value (long term severity in 2 hours value) can be measured.
•
12 kinds of Power Measurements for Power Control and Applicable to Power Quality Control including Harmonics Analysis.
•
One click easy-to-use operation helps complicated setting and processing of large data through the setting / analyzing software provided as accessory.
•
Direct communication with PC via USB cable
|
Power Meter
|
|
|
|
|
|
|
Kyoritsu 8325F
|
|
Flicker Sensor
Can measure Flicker in combination with KEW6310.
For use with following model
6310
|
Power Meter
|
|
|
|
|
|
|
Kyoritsu 8128
|
|
Load current clamp sensor
Applicable model 5010/5020, 6300, 6305, 6310, 6315 |
Power Meter
|
|
|
|
|
|
|
Kyoritsu 8127
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
|
|
|
|
Kyoritsu 8126
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
|
|
|
|
Kyoritsu 8125
|
|
Load current clamp sensor
Applicable model
5010/5020 (*), 6300, 6305, 6310, 6315
*
When you use the sensors with KEW5010/5020, please check the "Applicable model list" to check if your KEW5010/5020 can be used with the sensors.
|
Power Meter
|
|
|
|
|