MSR SHOCK LOGGERS FROM SWITZERLAND (SWISS MADE)

Name	Description	Category
Fluke 705 Loop Calibrator	A large display and simple, pushbutton interface for ease of use. Simultaneous mA and % readout for quick, easy interpretation of readings. mA accuracy of 0.02% Push button 25% steps for fast, easy linearity checks. Save time over traditional knob type controls. "Span Check" for fast confirmation of zero and span. Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests. 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM. Single 9V battery that is easily changed. 0 - 20 mA or 4 - 20 mA default start up modes.	Loop Calibrators
Fluke 707 Loop Calibrator	Large display and simple, quick-click interface for easy one-handed operation Simultaneous mA and % readout for quick, easy, interpretation of readings mA accuracy of 0.015%, superior to other loop calibrators in this price range 1µA resolution for mA source, simulate and measure Push button 25% steps for fast, easy linearity checks 0-100% "span check" for fast confirmation of zeroand span Measures V dc to 28 V Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM Single 9 V battery that is easily changed 0-20 mA or 4-20 mA default start up modes Innovative output adjustment dial with 1 µAand 100 µA resolution HART™ mode connects 250 W resistor in serieswith 24 V loop for compatibility with HART communicators. Also available Fluke 707EX Intrinsically safe model	Loop Calibrators
Fluke 1577 and 1587 Insulation Multimeters	Large display with backlight Insulation test (1587: 0.01 Mohm to 2 Gohm), (1577: 0.1 Mohm to 600 Mohm) Insulation test voltages (1587: 50 V, 100 V, 250 V, 500 V, 1000 V), (1577: 500 V, 1000 V) Live circuit detection prevents insulation test if voltage> 30 V is detected for added user protection Auto-discharge of capacitive voltage for added user protection AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (W), Continuity Auto power off to save battery power CAT III 1000 V, CAT IV 600 V measurement category Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work Rugged, utility hard case allows you to bring everything you need for the job 3-year warranty	Megohmmeters
Fluke 1503 2000 MΩ Insulation Resistance Multimeter	Insulation Test Range: 0.1MΩ to 2000MΩ Insulation Test Voltages: 500 V, 1000 V Saves both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio Repetitive or hard-to-reach testing is easy with the remote test probe Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection Auto-discharge of capacitive voltage for added user protection AC/DC voltage: 0.1 V to 600 V 200 mA Continuity Resistance: 0.01 Ω to 20.00 K Ω Save battery power with auto Power off Read measurements easily with large, backlit display CAT IV 600 V over-voltage category rating for added user protection	Megohmmeters
Fluke 1507 Insulation Resistance Multimeter	Insulation Test Range: 0.01MΩ to 10GΩ Insulation Test Voltages: 50V, 100V, 250V, 500V, 1000V Automatic calculation of Polarization Index and Dielectric Absorption Ratio saves both time and money Compare (Pass/Fail) function makes repetitive tests simple and easy Saves both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio Repetitive or hard-to-reach testing is easy with the remote test probe Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection Auto-discharge of capacitive voltage for added user protection AC/DC voltage: 0.1 V to 600 V 200 mA Continuity Resistance: 0.01 Ω to 20.00 K Ω Save battery power with auto Power off Read measurements easily with large, backlit display CAT IV 600 V over-voltage category rating for added user protection	Megohmmeters
Fluke 725 Multifunction Process Calibrator	Support flow meter testing with frequency and CPM functions Perform fast linearity tests with auto- step and auto-ramp features Power transmitters during test using loop supply with simultaneous mA measurement Store frequently used test setups for later use Backlight lets you work in poor light Large battery capacity of four AA cells Battery door for easy changes Also available Fluke 725EX Intrinsically safe model	Multifunction Calibrators
Fluke 726 Precision Multifunction Process Calibrator	More precise measurement and calibration source performance, accuracies of 0.01% Transmitter error% calculation, interpret calibration results without a calculator Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis Frequency totalizer and frequency pulse train source mode for enhanced flow meter testing HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation Integrated pressure switch test allows you to capture the set, reset and deadband of a switch Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement New voltage input protection design for improved reliability Two separate channels; measure, source and view process signals simultaneously Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters Measure or source pressure using any of 29 Fluke 700Pxx Pressure Modules Source mA with simultaneous pressure measurement to conduct valve and I/P tests Perform fast linearity...	Multifunction Calibrators
Fluke 985 Six channel Particle Counter, 0.3 μm to 10 μm Range	Six channels and particle size range 0.3 μm to 10 μm Ultra-lightweight and ergonomic design for easy single-hand operation Ten hours of standard-use battery life Large 3.5 inch QVGC color display with backlight, intuitive icons, and large font options 10,000 records stored for easy access to historical data Data can be viewed in traditional tabular or trend graph Configurable display, sample methods, and alarm setting for sample size count (raw count, per cubic feet, cubic meter, or liter) Data export to USB memory stick or direct connection to PC via USB cable. No special software required to view Excel compatible files Ethernet enabled for accessing data via internet browser. USB/Ethernet charge cradle ensures unit always ready for use Administrator password control (optional) for added security Meets ISO 21501, JIS B9921, and CE standards	Particle Counter