MSR SHOCK LOGGERS FROM SWITZERLAND (SWISS MADE)

Name	Description	Category
Fluke 8808A 120V, 5.5 Digital Bench Multimeter	5.5 digit resolution Dual Display Measures V dc/ac, I dc/ac, Ω, Freq, Continuity, Diode Basic V dc accuracy of up to 0.015% Min, Max, Rel, dB, dBm 2x4 Wire Ohms measurement technique Dedicated dc leakage current ranges Six dedicated buttons for fast access to instrument setups Hi/Lo limit compare for Pass/Fail testing	Benchtop Multimeters
Fluke 8845A 6.5 Digit Precision Digital Bench Multimeter, 35 ppm	6.5 digit resolution Basic V dc accuracy of up to 0.0035 % Dual display 100 μA to 10 A current range, with up to 100 pA resolution Wide ohms range from 10 Ω to 1 GΩ with up to 10 μΩ resolution 2 x 4 ohms 4-wire measurement technique Measures frequency and period Fluke 45 and Agilent 34401A emulation Graphical display Trendplot paperless recorder mode, statistics, histogram CAT I 1000 V, CAT II 600 V For the 24 ppm Model See Fluke 8846A	Benchtop Multimeters
Fluke 8846A 6.5 Digit Precision Digital Bench Multimeter, 24 ppm	6.5 digit resolution Basic V dc accuracy of up to 0.0024 % Dual display 100 μA to 10 A current range, with up to 100 pA resolution Wide ohms range from 10 Ω to 1 GΩ with up to 10 μΩ resolution 2 x 4 ohms 4-wire measurement technique Both models measure frequency and period Measures capacitance and temperature USB memory drive port Fluke 45 and Agilent 34401A emulation Graphical display Trendplot paperless recorder mode, statistics, histogram CAT I 1000 V, CAT II 600 V For the 35 ppm Model See Fluke 8845A	Benchtop Multimeters
Fluke 705 Loop Calibrator	A large display and simple, pushbutton interface for ease of use. Simultaneous mA and % readout for quick, easy interpretation of readings. mA accuracy of 0.02% Push button 25% steps for fast, easy linearity checks. Save time over traditional knob type controls. "Span Check" for fast confirmation of zero and span. Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests. 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM. Single 9V battery that is easily changed. 0 - 20 mA or 4 - 20 mA default start up modes.	Calibrators
Fluke 707 Loop Calibrator	Large display and simple, quick-click interface for easy one-handed operation Simultaneous mA and % readout for quick, easy, interpretation of readings mA accuracy of 0.015%, superior to other loop calibrators in this price range 1µA resolution for mA source, simulate and measure Push button 25% steps for fast, easy linearity checks 0-100% "span check" for fast confirmation of zeroand span Measures V dc to 28 V Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM Single 9 V battery that is easily changed 0-20 mA or 4-20 mA default start up modes Innovative output adjustment dial with 1 µAand 100 µA resolution HART™ mode connects 250 W resistor in serieswith 24 V loop for compatibility with HART communicators. Also available Fluke 707EX Intrinsically safe model	Calibrators
Fluke 707EX Intrinsically Safe Loop Calibrator	ATEX Intrinsic Safe Certification for use in classified areas. Large display and simple, quick-click push rotary button for easy one-handed operation Simultaneous mA and % readout for quick, easy, interpretation of readings mA accuracy of 0.015 %, superior to other loop calibrators 1 µA resolution for mA source, simulate and measure Push button with 25 % steps for fast, easy linearity checks 0-100 % "span check" for fast confirmation of zero and span Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests Internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM Measures V dc to 28 V Single 9 V battery that is easily changed Innovative output adjustment dial with 1µA and 100 µA resolution HART® compatible resistance is connected in series with the loop supply for compatibility with HART communicators	Calibrators
Fluke 712 RTD Process Calibrator	Measure temperature from RTD output Simulate RTD output Operates with seven types of RTDs Measure additional RTDs using Ohms measurement function Simulate additional RTDs using Ohms source function °F or °C selectable Four shrouded banana jacks Compatible with Rosemount® pulsed RTD transmitters(pulses > 100ms)	Calibrators
Fluke 714 Thermocouple Calibrator	Measure temperature from Thermocouple output Simulate Thermocouple output Operable with nine types of thermocouples Calibrate linear Thermocouple transmitter with mV source function Selectable °F or °C Thermocouple mini-jack termination	Calibrators