You have 0 items in your cart.
Fluke
Sub Categories
Category:
Calibrators
ATEX Intrinsic Safe Certification for use in classified areas. Large display and simple, quick-click push rotary button for easy one-handed operation Simultaneous mA and % readout for quick, easy, interpretation of readings mA accuracy of 0.015 %, superior to other loop calibrators 1 µA resolution for mA source, simulate and measure Push button with 25 % steps for fast, easy linearity checks 0-100 % "span check" for fast confirmation of zero and span Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests Internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM Measures V dc to 28 V Single 9 V battery that is easily changed Innovative output adjustment dial with 1µA and 100 µA resolution HART® compatible resistance is connected in series with the loop supply for compatibility with HART communicators
Category:
Calibrators
Measure temperature from RTD output Simulate RTD output Operates with seven types of RTDs Measure additional RTDs using Ohms measurement function Simulate additional RTDs using Ohms source function °F or °C selectable Four shrouded banana jacks Compatible with Rosemount® pulsed RTD transmitters(pulses > 100ms)
Category:
Calibrators
Measure temperature from Thermocouple output Simulate Thermocouple output Operable with nine types of thermocouples Calibrate linear Thermocouple transmitter with mV source function Selectable °F or °C Thermocouple mini-jack termination
Category:
Calibrators
Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution Measure voltage output process signals from PLCs, transmitters Source or simulate 24 mA loop current Source voltage to 100 mV or 10V 24V loop supply with simultaneous current measurement Enhanced voltage and current measure and source accuracy Improved battery life 250 ohm HART resistor with loop power Holster features test lead storage Compatible with toolpack magnetic hanging system Step and linear ramp output function Configurable zero and span settings
Category:
Calibrators
General Features: Measure pressure and vacuum to 0.05% of full scale with internal 30 or 100 psig sensor 1/8 NPT pressure fitting Compatible with non-corrosive gasses and liquids Measure pressure to 10,000 psi/69 mPa using one of 29 Fluke 700Pxx Pressure Modules Measure mA with 0.025% accuracy and 0.001 mA resolution, while providing 24 volt loop power New built-in pressure switch test feature Min/Max/Hold functions Fluke 718 Features: Built-in pressure/vacuum hand pump, with vernier and bleed valve Pressure and vacuum measurement to 0.05% of full span, using an internal pressure sensor (dry air only)
Category:
Calibrators
ATEX II 1G EEx ia IIC T4 Compliant Built-in pressure / vacuum hand pump, with fine adjust vernier and bleed valve Pressure measurement to 0.05% of full span, using an internal pressure sensor Pressure measurement to 200 bar using any of eight intrinsically safe Fluke 700PEx Pressure Modules Wide range of selectable measurement units for pressure Current measurement with 0.02% accuracy and 0.001 mA resolution Pressure switch test function Min-Max Hold functions Simple, push-button user interface Rugged and reliable, ideal for field use
Category:
Calibrators
General Features: Electric pump for one handed pressure calibration Best in class pressure measurement uncertainty of 0.025 % Measure and source mA with best in class 0.015 % accuracy Precision pressure adjust vernier Variable release rate bleed valve for easy pressure adjustment Ideal performance for high accuracy transmitter calibration 30 PSI and 100 PSI pressure ranges Programmable pump limit: Eliminates over-pressurization Allows the user to program target pressures for pumping Extended measurement range with any of twenty-nine (29) 700Pxx Pressure Modules Source mA with simultaneous pressure measurement to test valves and I/Ps Simulate mA signals to troubleshoot 4-20 mA loops Test pressure switches with built in switch test function Power transmitters during test using 24 V loop supply Proven cleanout ports reduce pump failures
Category:
Calibrators
Electric pump for one handed pressure calibration Eliminate the need for a separate hand pump Best in class pressure measurement uncertainty of 0.025% Measure and source mA with best in class 0.015% accuracy Precision pressure adjust vernier for accurate pressure calibration Variable release rate bleed valve for easy pressure adjustment Ideal performance for high accuracy transmitter calibration 30 PSI, 150 PSI and the long requested 300 psi (2, 10 and 20 bar) pressure ranges Programmable pressure calibrator pump limit: Eliminates overpressurization Allows the user to program target pressures for pumping Built-in electrically driven pump capable of generating 300psi. Extended pressure measurement range with any of 29 700Pxx Pressure Modules Source mA with simultaneous pressure measurement to test valves and I/Ps Simulate mA signals to troubleshoot 4 20 mA loops Test pressure switches with built in switch test function Power transmitters during test using 24 V loop supply with simultaneous mA measurement Proven cleanout ports reduce pump failures Moisture trap included with the unit helps mitigates risk of moisture damage