MSR SHOCK LOGGERS FROM SWITZERLAND (SWISS MADE)

Name	Description	Category
TMT114-CROSS HATCH CUTTER	Specifications H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching. This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade. 2.Multi-cutting blades spacing:1mm/2mm/3mm 3.The number of square:25squares/100squares	CROSS HATCH CUTTER
PRO0021-6200V3 Graphic Power Clamp for 1-,3-phase (PF,Harmoncs,KWH)	Analysis for Single Phase and Balanced 3 phase system True RMS Value (V and I) Active Power (K,KW,MW,GW) Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR) Power Factor (PF), Phase Angle( Φ ) Energy (WH,KWH,KVARH,PFH) Programmable PT(1 to 3000)Ratios Display of Overlapped Voltage and Current Waveform Maximum Demand (MD in W,KW,MW) with programmable Period Harmonic Analysis (V and I) to 50th Order Display of 25 Harmonics in one screen Optical Isolated RS-232C Interface Smart Datalogging to save Battery Datalogging of 32,64,128 or 256 points/cycles Analysis of Total Harmonic Distortion (%THD-F) Graphic Phasor Diagram Capture 128 Transient Events (Time+Cycles+Faults) with Programmable Threshold(%),also can be reviewed in LCD 50000 Records with Programmable Interval (1 to 6000 seconds) Real-time Output of Waveform, Power Parameters and Harmonics at Command Large Dot Matrix LCD Display with Backlight Power for Long-term Monitoring Built -in Calendar Clock for Data Logging General Specification: Conductor Size 55mm(approx.), 64*24mm(bus bar) Battery Type Two...	Power clamps
HIO0006-3286-20 POWER CLAMP METER	Functionality and Safety Packed into a Handheld Unit Use as a single-phase power meter Measure phase on a single-phase line Simple checking of three-phase lines Check power supply fluctuations For harmonic suppression External output of data to PC Printer output to 9442 (optional)	Power clamps
LUT0366-Clamp power analyser 2000amps 600VAC SD logging (Same as Fluke 345)	The clamp power analyser is a very economical solution for the analysis of single phase or balanced 3 phase systems with voltages to 600VAC and current to 2000 amps. The product uses the same SD card logging. Readings are logged from every 2 second to 7200 seconds as instantaneous values. It also captures 3 types of transient events with programmable threshold. The display is graphical dot matrix and has many graphic formats including waveform on voltage and current - phasor diagram and others. Measures ACV, ACA, KW, KVA, KVAR, PF Measures KWH, KVAH, KVARH, PFH Frequency, harmonics to 50th Type K thermocouple input 0.1 resolution to 199.9C then 1C to 1200C SD card logging Cables to 57mm 10amps to 2000amps autorange Record graphic displays to memory as .bmp files	Power clamps
TEN810-Datalogging Large Wall Display Temperature /Humidity Monitor with 95dB Sound Alarm/Controller	Complete environmental monitor and alarm - Wall-Mounted LED type, easy reading - Alarm set for Hi and Low limit-Temperature and Humidity - Data Logging Capacity 30,000 records - LED displays real time data - USB interface- XL Display: 260 x 178 x 47mm- High Accuracy and high sensitivity	Wall-display humidity meters
CEN0017- Wall Display Hygro Thermometer (With Alarm) 31	Large, easy-to-read dual LCD displays Humidity and Temperature. 3%RH humidity accuracy. Calibration available on site. Desk or wall mount. MAX/MIN value monitor. Audible and visual alarms, with adjustable set points, warns if limits are exceeded. 31 Hygro Thermometer (With Alarm) This is our proposed full time environmental monitoring system. Its detachable probe and can be verify or calibrated through optional signal extending cable and our standard calibration cell. Monitoring limit can be set to this unit. Once the environment condition is out of the setup condition, the unit will send the warning with buzzing and blinking display. Features: Large, easy-to-read dual LCD displays Humidity and Temperature. 3%RH humidity accuracy. Calibration available on site. Desk or wall mount. MAX/MIN value monitor. Audible and visual alarms, with adjustable set points, warns if limits are exceeded.	Wall-display humidity meters
TST0189/190 - Wall Display Thermo-Hygrometer with/without alarm with Resolution 0.1 deg.c	The accurate TST0189/190 alarm hygrometer reliably indicates when humidity and temperature limits have been exceeded, for example in garden centres, warehouses, cleanrooms, museums, laboratories etc. All the benefits of TST0189 High accuracy ±2 %RH (TST0190) TST0190 with LED alarm, warns if limits are exceeded Storage temperature -40 to +70 °C Operating temperature -10 to +70 °C Battery type 9V block battery Battery life 8736 h Weight 168 g Material/Housing ABS Probe type NTC Meas. range -10 to +70 °C Resolution 0.1 °C Probe type humid. sensor, cap. Meas. Range +2 to +98 %RH Resolution 0.1 %RH	Wall-display humidity meters
KKI0002-Wall Display Thermo-Hygrometer with max/min reading and external sensor JB913	Feature: -Provide temperature and humidity display with Dry,Wet,Comfort Indication -Monitor Max,Min temp./humidity reading -With water-proof external outdoor temperature sensor	Wall-display humidity meters