MSR SHOCK LOGGERS FROM SWITZERLAND (SWISS MADE)

Name	Description	Category
PROVA 700 Milli-Ohmmeter	Best resolution 1μΩ. Accuracy 0.05% 5A (120 mΩ) max. test current. Manual or Auto Range. (There are 6 ranges of current measurement, and furthermore 3 ranges in each current range.) Measurement of resistive and inductive materials (Two terminal measurement; Four terminal Kelvin measurement) Programmable Hi-Lo alarm with memory of 20 data. Auto-judgments of Hi (readings higher than Hi-Limit), Lo (readings lower than Lo-Limit) and Pass (readings between Hi-Lo Limits). Alarm (beeper) for Hi and Lo. Readings Hold function. Cable length measurement. The length unit can be selected between Meter (M) and Feet (FT). Resistance measurement results excluding cable resistances. Memory of 3,000 measurement data. Large LCD (5-digit) with backlight (users can choose to disable it). Rechargeable batteries and AC adaptor. Low battery (voltage) alarm. Low power consumption. Communicate with PC via RS232C (to USB bridge) cable. Application: various low-resistance (cables) measurement; contact resistance measurement, …etc.	Milli-Ohmmeter
TES-133 Luminous Flux Meter	4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Auto ranging from 0.05 to 7000 lumens. Accurate and Instant response. Data Hold function. Data memory and read function. Zero function. Ratio function. Sort function. Comparator function. Best for measuring : LEDs, Small lamps, Fiber illuminators. Auto power off function. RS232 Interface. Easy to use. Adapters kit : 2/3/4/5/8/10m/m	Luminous Flux Meter
TES-135 Color Meter	Check the color difference between two samples. Color difference displayed Δ(L,a,b) Δ(Eab,Cab, Hab) Δ(Y, x, y) Δ(X, Y, Z) or Δ(Rs, Gs, Bs) Color space displayed (L, a, b) (L, C*ab, hab) (Y, x, y) (X, Y, Z) or (Rs, Gs, Bs) Maximum, Minimum and Average function. Tolerance function. Auto memory (99 sets) & Read function. RS232 interface.	Color Meter
Testo 405 (0560 4053) Thermal Anemometer w/ Telescopic Velocity stick	Volume flow calculation up to 99,990 m3/h Temperature measurement Ideal for measurements in ducts Easily read data at any angle with rotating display Telescopic handle to 300 mm Cap rotates to protect sensor against moisture and dirt, 118 in long telescopic handle	Anemometers
Testo 410-1 (0560 4101) Vane Anemometer w/ NTC Air Thermometer	Flow velocity meter with temperature measurement Integrated 1.5" diameter vane Timed mean value calculation Hold function and max./min. values Windchill calculation for outside areas (perceived temperature) Back lit display Protection cap for safe storage Including wrist strap and belt clip	Anemometers
Testo 410-2 (0560 4102) Vane Anemometer w/ Humidity and NTC Air Thermometer	Air humidity meter with temperature measurement Integrated measurement with 1.5 in. vane Timed mean value calculation Hold function and max./min. values Windchill calculation for outside areas (perceived temperature) Back lit display Protective cap for safe storage Including wrist strap and belt clip Air humidity measurement with long-term stable Testo humidity sensor Incl. dewpoint calculation and wet bulb Incl. calibration certificate	Anemometers
Testo 416 (0560 4160) ABS Vane Anemometer	Direct display of volume flow (CFM) Multi-point and timed mean calculations Max - Min values make comparisons fast and easy "Hold" button freezes readings Back lit display Auto-Off function TopSafe, the indestructible protective case (optional) 0.6 to 40 m/s measuring range Accuracy: +/- 0.2 m/s + 1.5 percent of mv Resolution: 0.1 m/s. -40 to 185 ° F storage temperature -4 to 122 ° F 9V battery 80 hours of battery life Weight 11.5 oz. Measures 7" length by 2.5" width by 1.6" height ABS housing material	Anemometers
Testo 416-KIT (400563 4161) Anemometer w/ Cabled Telescopic Vane Probe	Direct display of volume flow (CFM) Multi-point and timed mean calculations Max - Min values make comparisons fast and easy "Hold" button freezes readings Back lit display Auto-Off function TopSafe, the indestructable protective case (optional)	Anemometers