MSR SHOCK LOGGERS FROM SWITZERLAND (SWISS MADE)

Name	Description	Category
Fluke STL120-III Shielded Test Leads	Length: 1.2m (48”) Bandwidth: 12,5 MHz Maximum Signal Voltage: 600V rms. CAT III per IEC 1010-2-031 Maximum Voltage to Ground: 600V rms. CAT III per IEC 1010-2-031 Maximum Current: 1A	Test Leads, Probes, Clips
Fluke TAS90 Shielded Test Lead Accessory Set	Set contains 30 V CAT II rated: Four 4mm adapters for banana plug (1 red, 1 gray, 2 black) Four Backprobe pins for banana plug, 1 A (1 red, 1 gray, 2 black)	Test Leads, Probes, Clips
Fluke TL220 SureGrip™ Industrial Test Lead Set	Handy all-in-one kit that includes : AC220 SureGrip™ Alligator Clip Set TP220 SureGrip™ Test Probe Set TL222 SureGrip™ Silicone Test Lead Set (right to right) One year warranty	Test Leads, Probes, Clips
Fluke TL221 SureGrip™ Test Lead Extension Set	One pair (red, black) of silicone insulated leads with straight connectors on both ends Reinforced strain relief Includes one pair (red, black) of female couplers Extends test leads by 1.5 m 600 V CAT IV, 1000 V CAT III, 10 A rating. UL listed One year warranty	Test Leads, Probes, Clips
Fluke TL223 SureGrip™ Electrical Test Lead Set	Handy all-in-one kit that includes : AC220 SureGrip™ Alligator Clip Set TP1 Slim-Reach™ Test Probes (flat bladed) TL224 SureGrip™ Silicone Test Lead Set (straight to right) One year warranty	Test Leads, Probes, Clips
Fluke TL223-1 Suregrip Electrical Test Lead Set	Kit Includes: AC220 SureGrip Alligator Clips TP220 SureGrip Industrial Test Probes TL224 SureGrip Silicone Test Lead Set (straight to right) One year warranty	Test Leads, Probes, Clips
Fluke TL224 SureGrip™ Insulated Test Lead Set	DMM test leads (red, black) with safety shrouded, standard diameter banana plugs Right angle connector on one end and straight connector on the other Reinforced strain relief 1.5 meter silicone-insulated wire resists heat & cold CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty	Test Leads, Probes, Clips
Fluke TL225 SureGrip™ Stray Voltage Adapter Test Lead Kit	It makes sure the meter has a low input impedance that eliminates stray voltages On energized wires, the meter will indicate the real voltage On non-energized circuits the meter will read close to zero (even if there are stray voltages) It can be used with all modern meters with standard input spacing Rated CAT III 1000 V, CAT IV 600 V One year warranty Kit includes: SV225 Stray Voltage Eliminator TL224 SureGrip™ Silicone Test Lead Set (right to straight) TP220 SureGrip™ Test Probe Set C75 Accessory Case	Test Leads, Probes, Clips