Datalogger/Recorders
Features: •Analysis for 3 phase multi-power system, 1P/2W,1P/3W, 3P/3W, 3P/4W •Voltage & Current are the True RMS value. •True Power ( KW、MW、GW ) measurement. •Apparent Power ( KVA、MVA、GVA ) measurement. •Reactive Power ( KVAR MVAR、GVAR) measurement. •Watt-Hour ( WH、SH、QH、PFH ). •Power Factor( PF )、Phase Angle( Φ ). •Voltage measurement range : 10 to 600 ACV •Current measurement range: 0.2A to 1200 ACA. •Programmable CT ratio (1 to 600) and PT ratio (1 to 1000). •ACV input impedance is 10 Mega ohms. •Safety Standard : IEC 1010, CAT III 600V •Built-in clock and Calendar, real time data record with SD memory card , sampling time set from 2 to 7200 seconds. Just slot in the SD card into the computer, it can down load the all the measured value with the time information ( year/month/data/hour/mimute/second ) to the Excel directly, then user can make the further data analysis by themselves. •Measurement: * ACV * ACA * AC WATT ( True Power )AC WATT( Apparent Power )AC WATT( Reactive Power ) * Power factor * Phase angle * Frequency Standard Accessories: * Instruction manual.......................1 PC * Test Leads...
Features: •Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,3P/3W, 3P/4W •3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary •Current probe input signal/ranges with selection:Input signal (ACV):200 mV/300 mV/500 mV/1 V/2 V/3 VRanges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A. •Meter can cooperate the universal current probes •Measurement: V (phase-to-phase), V (phase-to-ground) A (phase-to-ground) KW / KVA / KVAR / PF (phase) KW / KVA / KVAR / PF (system) KWH / KVAH / KVARH / PFH (system) Phase angle •Harmonics display (1-50th order) •Simultaneous display of Harmonics and Wave form •Display of Waveform with Peak Values •Analysis of Total Harmonic Distortion ( THD ) •Graphic Phase diagram with 3-Phase system parameters •3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR ) and Unbalanced Factor •Calculated Unbalanced Current through Neutral Line ( An ) Standard Accessories: * Instruction manual............... 1 PC * Test Leads (TL88-4AT).......... 1 Set (4 PCs) * Alligator clips (TL88-4AC) 1 Set (4 PCs) * Clamp Probe ( CP-1201 )....... 3 PCs * AC to DC 9V adapter..............1...
Recorder with real time data logger, save the measuring data along the time information ( year, month, date, hour, minute, second ) into the SD memory card and can be downloaded to the Excel, extra software is no need. * Frequency range 10 Hz - 1 KHz, sensitivity relative meet ISO 2954. * Meter supply with vibration sensor and magnetic base, full set. * Acceleration : 200 m/s^2. Velocity : 200 mm/s. * Built-in the 4 to 20 mA output signal, it can cooperate with the 4 to 20 mA controller to be used as the vibration controller. * Metric & Imperial display unit. * Large LCD display, easy readout. * Power supply from DC 9V adapter in, power adapter is included. Also it needs DC 1.5V ( UM-4/AAA ) battery x 6 PCs for clock power supply. * RS232/USB computer interface. * Size : 132 x 80 x 32 mm
Complete vibration monitor -Velocity Measurement -Acceleration Measurement -Displacement Measurement -Direct Graphical Analysis
* Acceleration : 200 m/s2. Velocity : 200 mm/s. Displacement: 1.999 mm * Max hold, peak value, data hold. * Memory ( Max., Min. ). * RS232/USB computer interface, Patented. * Vibration sensor is the standard accessory. * Patent: Taiwan, China, Japan, Germany, USA pending.
• Range : - Light : 0 to 100,000 LUX - thermometer : -50.0 to 1300.0 ℃ • Accuracy : - Light : ± (4 %+2 dgt) - thermometer : ± ( 0.4 % + 0.5 ℃ ) FEATURES : • 3 ranges, 2,000/20,000/100,000 LUX. • LUX & Foot Candle unit selection with default. • Auto range for light measurement. • Spectrum of photo sensor meets C.I.E.. • Light measurement with zero adjustment by push button. • Separate probe, easy for operation of different measurement environment. • Type K, Type J thermocouple thermometer. • SD card capacity : 1 GB to 16 GB. • LCD with green light backlight, easy reading. • Can default auto power off or manual power off. • Data hold, record max. and min. reading. • Microcomputer circuit, high accuracy. • RS232/USB PC COMPUTER interface. • Weight : 489 g/1.08 LB. • Dimension : 177 x 68 x 45 mm Accessories Included • Instruction manual...............................1 PC • Light sensor with protective cover.... 1 PC • Soft carrying case ( CA-05 )................1 PC
3 channels Type K Input SD card recording
12 channels Temperature recorder, use SD card to save the data along with time information, ?paperless. Real time recorder, save the measuring data along the time information (year, month, date,?? ?minute, second) into the SD memory card and can be download to the Excel, extra software is ?no need. Channels no. : 12 channels (CH1 to CH12) temerature measurement Sensor type : Type J/K/T/E/R/S thermocouple. Auto recorder or manual recorder. Recorder sampling time range : 1 to 3600 seconds. Type K thermometer : -100 to 1300 C Show CH1 to CH8 or CH9 to CH12 in the same LCD. Display resolution : 1 degree/0.1 degree. Time information : Year, Month, Date, Hour, Minute and Second. Memory card size : 1 GB to 16 GB. Supper large LCD with backlight, easy reading. Data hold, Record (Max., Min.). RS232/USB computer interface. Optional type K temperature probe : TP-01,TP-02A,TP-03,TP-04. DC 1.5V (UM-3, AA) x 8 PCs or DC 9V adapter in. Patent: Taiwan, China, Japan, Germany, USA pending.